Changes to Step #12
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] Gantry Carriage |
|---|---|
| + | [* 5] Fix the gantry carriage to the Z-Rail as shown with four M3 x 8mm cap head bolts. |
| + | [* 2] Note the orientation of the carriage. The side with the small insets should point towards the rear of the printer. |
Image 1
No previous image
Added
Image 2
No previous image
Added