Changes to Step #13

Edit by Makertech

Edit approved by Makertech

Before
After
Unchanged

Step Lines

+[title] Fixing the Gantry
+[* red] Re-attach the the lead screw to the gantry.
+[* blue] Next fix the coupling to the z-motor shaft.
+[* green] Finally, fix the gantry to the carriage with four M4 x 6mm bolts.
+[* icon_note] You can also now reattach the end stop and cables.

Image 1

No previous image

Added

Image 2

No previous image

Added

Image 3

No previous image

Added