Changes to Step #6
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Powering On | |
| [* 1] Powerig on for the first time should result in the following: | |
| [* 1] The Touch Screen Display should power on. | |
| [* 1] The Hotend cooling fan should spin. | |
| [* 1] The electronics fan should spin. | |
| + | [* 1] After a short moment, the display should connect to the control board and your printer should be ready. |