Changes to Step #6

Edit by Makertech 3D —

Edit approved by Makertech 3D

Before
After
Unchanged

Step Lines

[title] Powering On
[* 1] Powerig on for the first time should result in the following:
-[* 1] The Touch Screen Display should power on.
+[* 1] The Touch Screen Display should power on and begin updating.
[* 1] The Hotend cooling fan should spin.
[* 1] The electronics fan should spin.
-[* 1] After a short moment, the display should connect to the control board and your printer should be ready.
+[* 1] The LED's should light up.