Changes to Step #1
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Control Board Firmware | |
| - | [* 1] Download the Control Board Marlin firmware here. |
| - | [* 1] Copy it onto the micro SD card. |
| - | [* 1] Insert the SD card into the board. |
| + | [* 10] Download the Marlin firmware depending on your configuration: |
| + | [* 1] 24V Heated Bed |
| + | [* 1] MIC-6 Heated Bed |
| + | [* 1] Copy the firmware.bin file over to the micro SD card. |
| + | [* 1] Insert the SD card into your control board. |