Changes to Step #1

Edit by Makertech 3D —

Edit approved by Makertech 3D

Before
After
Unchanged

Step Lines

[title] Control Board Firmware
[* 10] Download the Marlin firmware depending on your configuration:
[* 1] 24V Heated Bed
[* 1] MIC-6 Heated Bed
-[* 1] Copy the firmware.bin file over to the micro SD card.
-[* 1] Insert the SD card into your control board.
+[* 1] Copy the firmware.bin file to the micro SD card.
+[* 1] Insert the SD card into the control board.