Changes to Step #1

Edit by Makertech 3D —

Edit approved by Makertech 3D

Before
After
Unchanged

Step Lines

[title] Control Board Firmware
[* 10] Download the Marlin firmware depending on your configuration:
[* 11] [link|https://github.com/Makertech3D/Proforge-3/raw/main/Printer%20Firmware/Marlin-2.0.9.3_P3_24V-Bed.zip|24V Heated Bed]
[* 11] [link|https://github.com/Makertech3D/Proforge-3/raw/main/Printer%20Firmware/Marlin-2.0.9.3_P3_MIC6.zip|MIC-6 Heated Bed]
-[* 5] Copy the firmware.bin file to the micro SD card.
+[* 5] Unzip and copy the firmware.bin file to the micro SD card.
[* 4] Insert the SD card into the control board.