Changes to Step #1
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Control Board Firmware | |
| - | [* 10] Download the Marlin firmware depending on your configuration: |
| + | [* 10] Download the Marlin firmware depending on your configuration ([link|https://github.com/Makertech3D/Proforge-3|updated 6 March 2022]): |
| [* 11] [link|https://github.com/Makertech3D/Proforge-3/raw/main/Printer%20Firmware/Marlin-2.0.9.3_P3_24V-Bed.zip|24V Heated Bed] | |
| [* 11] [link|https://github.com/Makertech3D/Proforge-3/raw/main/Printer%20Firmware/Marlin-2.0.9.3_P3_MIC6.zip|MIC-6 Heated Bed] | |
| [* 5] Unzip and copy the firmware.bin file to the micro SD card. | |
| [* 4] Insert the SD card into the control board. |