Changes to Step #5

Edit by Makertech 3D —

Edit approved by Makertech 3D

Before
After
Unchanged

Step Lines

[title] Touch Screen Firmware
[* 10] Download the display firmware for the Direct Drive set-up [link|https://github.com/Makertech3D/Proforge-3/raw/main/Touch%20Screen%20Firmware/Touch-Screen-FW_P3-DD.zip|here].
-[* 5] Copy the files onto the SD card.
-[* 2] Insert the SD card into the display.
+[* 5] Delete any files on the SD card and copy these files onto the SD card.
+[* 2] With the printer powered down, insert the SD card into the display with the adaptor.