Changes to Step #16
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Motion Check | |
| [* 5] In the menu go to ''Movement'' | |
| [* 3] Click on ''Move'' | |
| [* 2] Set the motion increments to 10mm. | |
| - | [* 10] Use the buttons to move the axes around and confirm that the printer is making the desired movements. |
| + | [* 10] Use the buttons to move the X, Y and Z axes around and confirm that the printer is making the desired movements. |