Changes to Step #18

Edit by Makertech 3D —

Edit approved by Makertech 3D

Before
After
Unchanged

Step Lines

[title] Homing Z
[* 10] Before starting, place the flexplate onto the heated bed, if you've not already done so.
[* 5] Before homing the Z-axis, manually raise the platform to meet the tool carriage at the centre of the print platform.
[* 11] Before being able to move the carriage by hand, you will need to disable the stepper motors. This button can be found in the movement menu (''Disarm All'').
[* 3] The platform should trigger the probe (red light comes on) before the tip of the nozzle touches the flexplate.
-[* 7] With the above confirmed, home the Z-axis from the dispay.
+[* 7] With the above confirmed, home the Z-axis from the display.