Changes to Step #9

Edit by Makertech 3D —

Edit approved by Makertech 3D

Before
After
Unchanged

Step Lines

[title] Thermistor Check
[* 5] Thermistors should read room temperature.
-[* 10] You may find that the hotend thermistor is a little off/jumpy, that's OK as it's a high temp thermistor it may be slightly inaccurate at temps below 50C.
+[* 10] You may find that the hotend thermistor is a little off/jumpy, that's OK as it's a high temp thermistor and designed to be accurate at temps above 100C.