Changes to Step #4
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| [title] Powering On Cont. | |
| [* 10] Powering on for the first time should result in the following: | |
| [* 5] Electronics Fan should spin. | |
| [* 3] Hotend Cooling Fan should spin | |
| [* 6] LED's should light up. | |
| + | [* 11] If after a 2-3 minutes you do not get your hotend fan spinning, power off, wait 10 seconds and power on again. |