Changes to this Step
Edit by Makertech 3D —
Edit approved by Makertech 3D
- Before
- After
- Unchanged
Step Lines
| + | [title] PTFE Tubing |
|---|---|
| + | [* 1] High temp. setup: |
| + | [* 1] Cut cm of PTFE tubing |
| + | [* 1] Low temp. setup: |
| + | [* 1] Cut cm of PTFE tubing |
| + | [* 9] Ensure you use the tubing from the DSH box, as this is a precision tubing with a 1.9mm internal diameter. |
| + | [* 1] Fix each tubing to the extruder and DSH. |