Fix four stand-offs to the base:
M3 x 10mm threaded stand-off
M3 x 6mm Button
Before removing the control board from it's packaging, make sure that you are earthed, you can do this by touching a large metal object. This is to ensure a static shock doesn't damage the board.
Fix the board onto the mounts with four M3 x 6mm button head bolts.
Make sure the board is orientated as shown.
Plug the electronics fan into the control board as shown.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.