Editing Step 18 —
Homing Z

Step Type:

Drag to rearrange

Before starting, place the flexplate onto the heated bed, if you've not already done so.

Before homing the Z-axis, manually raise the platform to meet the tool carriage at the centre of the print platform.

Before being able to move the carriage by hand, you will need to disable the stepper motors. This button can be found in the movement menu (Disarm All).

The platform should trigger the probe (red light comes on) before the tip of the nozzle touches the flexplate.

With the above confirmed, home the Z-axis from the display.

Your contributions are licensed under the open source Creative Commons license.