The 30cm PI Power wires actually don’t have terminals on the ends!!! Don’t clip off the terminals on one set of wires!!! Look for the red and black wires with one U-spade connector!!!
I found it easier to loosen the three brackets slightly on each corner as I attached the corner plates. That allows the extruded bars to better align as you square the frame with the flat corner plates. Just don’t forget to tighten everything up after the corner plates are installed.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No description, depiction ,or explanation for the grub screw and single nut. Newbies may be seriously confused!
The 30cm PI Power wires actually don’t have terminals on the ends!!! Don’t clip off the terminals on one set of wires!!! Look for the red and black wires with one U-spade connector!!!
I used a metal file to make the missing notch.
They are in the M5 bolt package
I found it easier to loosen the three brackets slightly on each corner as I attached the corner plates. That allows the extruded bars to better align as you square the frame with the flat corner plates. Just don’t forget to tighten everything up after the corner plates are installed.