AXIS

Your 3D Printing Adventure Begins Here.

Official Makertech 3D Forum

Download repositories

The Axis 3D Printer Kit includes a set of Allen keys and cable ties however you will still need to make sure you have the following items in order to complete your build (you will likely already have these around the home):

- Scissors

- Lighter

- Pliers

- Phillips head screwdriver

- Small flat head screwdriver

- Tape measure

- Clear tape (single or double sided)

- Lubricant/cooking oil (optional but recommended)

- And if you have not ordered the FlexPlate or Power Pack upgrade, you will also need a roll of blue painters/masking tape as a surface to print onto.

A detailed breakdown of what's included can be found in the online build manual.

Base model Includes:

- Axis Base

- Axis Platform

- Metal parts and lead screw

- Box A - Electronics and Fasteners

- Box B - Mechanics

- Power supply, mains cable and adapter

Depending on which upgrades you have ordered you will also have:

- Power Pack: x2 filament rolls, LCD display, SD card, brass and steel nozzles, silicone hotend cover.

- Dual Extrusion

- OctoPrint

- Heated Bed with power supply and fixings

- Flexplate (single or double)

- TMC2208 Drivers (3 or 6pcs)

All of the above Upgrades can be ordered here.

The Axis 3D printer kit and its upgrades come with a 1 year warranty for parts. If you believe a part to be faulty or damaged please contact us at:

info@makertech3d.com.

Operate the Axis 3D printer in a well ventilated, open and dry environment.

Be aware of the moving parts, there is a pinching hazard.

Be cautious of the Hotend, it can reach temperatures exceeding 200 degrees Celsius, this is hot enough to cause severe burns. Even after operation the hotend can still be hot, allow time for it to cool before touching.

Keep children and pets away from the Axis 3D printer whilst in operation.

Never disconnect any of the wiring whilst powered on.

Be careful of long hair and loose clothing when operating the Axis 3D printer.

Immediately shut down the Axis 3D printer if an error occurs to prevent damage to the unit or its surroundings.

THIS PRODUCT IS A DO-IT-YOURSELF KIT TO BE ASSEMBLED BY THE USER AT THEIR OWN RISK. MAKERTECH 3D LTD DISCLAIMS ALL RESPONSIBILITY, RISK OR LIABILITY OF ANY DAMAGE OR INJURY TO YOURSELF OR ANY PERSON OR PROPERTY FROM ITS USE.

NEITHER MAKERTECH 3D NOR ITS SUPPLIERS SHALL BE LIABLE TO YOU OR TO ANY THIRD PARTY FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, PUNITIVE, OR EXEMPLARY DAMAGES (INCLUDING IN EACH CASE, BUT NOT LIMITED TO, DAMAGES FOR THE INABILITY TO USE OR ACCESS THE PRODUCTS, LOSS OF DATA, LOSS OF BUSINESS, LOSS OF PROFITS, BUSINESS INTERRUPTION OR THE LIKE) ARISING OUT OF THE USE OF OR INABILITY TO USE THE PRODUCTS, EVEN IF MAKERTECH 3D HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

MAKERTECH 3D IS NOT RESPONSIBLE FOR ANY PRODUCTS (3D PRINTED PARTS OR OTHER) PRODUCED WITH THE AXIS 3D PRINTER OR ANY OF MAKERTECH 3D'S OTHER PRODUCTS. IN NO EVENT SHALL MAKERTECH 3D BE LIABLE FOR ANY DAMAGE OR INJURY OCCURRED BY USING PRODUCTS PRODUCED BY THE AXIS 3D PRINTER OR ANY OF ITS OTHER PRODUCTS.

NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED HEREIN AND ALL DIRECT OR GENERAL DAMAGES IN CONTRACT OR ANYTHING ELSE), THE ENTIRE LIABILITY OF MAKERTECH 3D AND ANY OF ITS SUPPLIERS ARISING FROM OR RELATED TO THE USE OF THE PRODUCTS SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE PRODUCTS CONCERNED.

THE CUSTOMER IS FULLY AWARE OF THE TERMS OF USE MENTIONED IN THE ASSEMBLY MANUALS PROVIDED WITH THE PRODUCT AND AGREES WITH THESE TERMS OF USE WHEN ACCEPTING THE PRODUCT.

THE CUSTOMER HAS READ THE SAFETY INSTRUCTIONS PROVIDED IN THE MANUALS TO BUILD THE DIY-PRODUCTS OF MAKERTECH 3D. THE CUSTOMER ALSO AGREES IN FOLLOWING THESE SAFETY INSTRUCTIONS