You're viewing a previously published revision of this guide.  View latest revision

Older
Apr 13, 2022 - 09:04:00
Dec 06, 2022 - 09:12:10 May 27, 2022 - 04:05:12 Apr 14, 2022 - 07:04:08 Apr 14, 2022 - 02:04:53 Apr 14, 2022 - 02:04:45 Apr 14, 2022 - 02:04:17 Apr 14, 2022 - 02:04:14 Apr 14, 2022 - 02:04:39 Apr 14, 2022 - 01:04:17 Apr 14, 2022 - 01:04:22 Apr 14, 2022 - 01:04:39 Apr 14, 2022 - 01:04:58 Apr 14, 2022 - 12:04:24 Apr 14, 2022 - 12:04:26 Apr 14, 2022 - 12:04:40 Apr 14, 2022 - 12:04:22 Apr 13, 2022 - 04:04:03 Apr 13, 2022 - 04:04:09 Apr 13, 2022 - 04:04:49 Apr 13, 2022 - 10:04:02 Apr 13, 2022 - 09:04:06 Apr 13, 2022 - 09:04:32 Apr 13, 2022 - 09:04:20 Apr 13, 2022 - 09:04:00 Apr 13, 2022 - 09:04:08 Apr 13, 2022 - 09:04:01 Apr 13, 2022 - 09:04:20 Apr 13, 2022 - 09:04:59 Apr 13, 2022 - 09:04:17 Apr 11, 2022 - 09:04:43 Feb 08, 2022 - 05:02:24
Newer

Enclosure Install

Written By: Makertech 3D
  • Comments: 5
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

3

Time Required

01:00:00

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Find the filter case, carbon filters and HEPA cloth. Place a carbon filter onto the centre of the HEPA cloth. Cut the 4 squares from the corners as shown.

    • Find the filter case, carbon filters and HEPA cloth.

    • Place a carbon filter onto the centre of the HEPA cloth.

    • Cut the 4 squares from the corners as shown.

    • Push the carbon and HEPA filters into the filter case as shown.

  2. Trim away the excess HEPA cloth. Trim away the excess HEPA cloth.

    • Trim away the excess HEPA cloth.

  3. Remove the backing paper from the back panel. Fix the fume filter assembly to the back panel, with the 60mm fan on the other side. M4 x 25mm

    • Remove the backing paper from the back panel.

    • Fix the fume filter assembly to the back panel, with the 60mm fan on the other side.

    • M4 x 25mm

    • Make sure that the fan is fixed sticker side up.

Author

Makertech 3D

Member since: 3/9/18

51,265 Reputation

137 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 650