Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer
  1. Mount the Base with the rubber feet to the bottom of the Frame Assembly. Base
    • Mount the Base with the rubber feet to the bottom of the Frame Assembly.

    • Base

    • Rubber Foot

    • M5 x 60 Cap Head Bolt

    • The bolt should thread directly into the bottom of the extrusion.

  2. Insert wisdom here Insert wisdom here
    • Insert wisdom here

Makertech 3D

Member since: 3/9/18

51,265 Reputation

137 Guides authored

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 9

All Time: 687