You're viewing a previously published revision of this guide.  View latest revision

Older
Oct 20, 2024 - 11:10:10
May 03, 2025 - 04:05:55 Mar 19, 2025 - 11:03:01 Mar 08, 2025 - 09:03:29 Mar 08, 2025 - 09:03:49 Mar 08, 2025 - 09:03:49 Jan 15, 2025 - 04:01:46 Jan 15, 2025 - 04:01:25 Jan 15, 2025 - 04:01:54 Jan 15, 2025 - 04:01:55 Jan 10, 2025 - 07:01:13 Jan 10, 2025 - 07:01:32 Dec 15, 2024 - 02:12:43 Dec 15, 2024 - 02:12:02 Dec 15, 2024 - 02:12:32 Dec 13, 2024 - 11:12:21 Dec 13, 2024 - 11:12:46 Dec 13, 2024 - 11:12:24 Dec 13, 2024 - 11:12:52 Dec 07, 2024 - 09:12:26 Dec 07, 2024 - 09:12:51 Dec 07, 2024 - 12:12:09 Dec 07, 2024 - 12:12:34 Dec 06, 2024 - 11:12:46 Dec 06, 2024 - 10:12:54 Nov 27, 2024 - 10:11:50 Nov 18, 2024 - 01:11:37 Nov 17, 2024 - 04:11:47 Nov 17, 2024 - 04:11:22 Nov 17, 2024 - 04:11:18 Oct 23, 2024 - 09:10:23 Oct 23, 2024 - 09:10:23 Oct 23, 2024 - 09:10:35 Oct 23, 2024 - 09:10:04 Oct 23, 2024 - 09:10:27 Oct 23, 2024 - 08:10:17 Oct 23, 2024 - 08:10:27 Oct 23, 2024 - 08:10:38 Oct 23, 2024 - 07:10:02 Oct 23, 2024 - 07:10:19 Oct 23, 2024 - 07:10:09 Oct 23, 2024 - 07:10:48 Oct 23, 2024 - 07:10:41 Oct 23, 2024 - 07:10:25 Oct 23, 2024 - 07:10:12 Oct 23, 2024 - 06:10:55 Oct 23, 2024 - 06:10:02 Oct 22, 2024 - 03:10:42 Oct 22, 2024 - 03:10:21 Oct 22, 2024 - 03:10:07 Oct 22, 2024 - 03:10:08 Oct 22, 2024 - 03:10:47 Oct 22, 2024 - 03:10:01 Oct 22, 2024 - 03:10:29 Oct 22, 2024 - 03:10:58 Oct 22, 2024 - 10:10:31 Oct 22, 2024 - 10:10:23 Oct 22, 2024 - 10:10:04 Oct 22, 2024 - 10:10:53 Oct 22, 2024 - 10:10:11 Oct 22, 2024 - 10:10:46 Oct 22, 2024 - 09:10:38 Oct 22, 2024 - 09:10:22 Oct 22, 2024 - 08:10:43 Oct 22, 2024 - 08:10:34 Oct 22, 2024 - 07:10:37 Oct 22, 2024 - 07:10:52 Oct 22, 2024 - 06:10:55 Oct 22, 2024 - 06:10:37 Oct 21, 2024 - 05:10:32 Oct 20, 2024 - 12:10:28 Oct 20, 2024 - 12:10:21 Oct 20, 2024 - 12:10:45 Oct 20, 2024 - 12:10:28 Oct 20, 2024 - 12:10:11 Oct 20, 2024 - 12:10:20 Oct 20, 2024 - 12:10:57 Oct 20, 2024 - 12:10:02 Oct 20, 2024 - 12:10:34 Oct 20, 2024 - 12:10:41 Oct 20, 2024 - 12:10:13 Oct 20, 2024 - 12:10:07 Oct 20, 2024 - 12:10:56 Oct 20, 2024 - 12:10:08 Oct 20, 2024 - 11:10:10 Oct 20, 2024 - 11:10:14 Oct 20, 2024 - 11:10:13 Oct 20, 2024 - 11:10:22 Oct 20, 2024 - 11:10:13 Oct 20, 2024 - 11:10:10 Oct 20, 2024 - 11:10:00 Oct 20, 2024 - 11:10:53 Oct 20, 2024 - 11:10:42 Oct 20, 2024 - 11:10:33 Oct 20, 2024 - 11:10:18 Oct 20, 2024 - 11:10:04 Oct 20, 2024 - 11:10:37 Oct 20, 2024 - 11:10:16 Oct 20, 2024 - 11:10:41 Oct 20, 2024 - 11:10:14 Oct 20, 2024 - 11:10:18 Oct 20, 2024 - 11:10:40 Oct 20, 2024 - 11:10:47
Newer

Stage 02 : Base

Written By: Makertech 3D (and one other contributor)
  • Comments: 26
  • Favorites: 0
  • Completions: 2

Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Mount the Base with the rubber feet to the bottom of the Frame Assembly. Base

    • Mount the Base with the rubber feet to the bottom of the Frame Assembly.

    • Base

    • Rubber Foot

    • M5 x 60 Cap Head Bolt

    • The bolt should thread directly into the bottom of the extrusion.

  2. Before mounting the 24v PSU, check that its input voltage is set correctly.

    • Before mounting the 24v PSU, check that its input voltage is set correctly.

    • The switch on the side of the unit should be set to your mains voltage. For example, in Europe this would be 230v, and in North America it would be 110v.

  3. Mount the 24V PSU to the base. M4 x 6mm Button Head Bolts

    • Mount the 24V PSU to the base.

    • M4 x 6mm Button Head Bolts

    • Ensure it's mounted with the terminals pointing to the rear of the machine.

  4. Before mounting the 24v PSU, check that its input voltage is set correctly.

    • Before mounting the 24v PSU, check that its input voltage is set correctly.

    • The switch on the side of the unit should be set to your mains voltage. For example, in Europe this would be 230v, and in North America it would be 110v.

  5. Mount the 48V PSU to the base. M3 x6mm Cap Head Bolt

    • Mount the 48V PSU to the base.

    • M3 x6mm Cap Head Bolt

    • Again - ensure it's mounted with the terminals pointing to the rear of the machine.

  6. Mount the four NEMA-17 Motors to the base with M3 x 6mm cap head bolts. These are the smaller BIQU marked motors. Ensure that the cable connectors on the motors are all facing inwards under the base as shown.

    • Mount the four NEMA-17 Motors to the base with M3 x 6mm cap head bolts.

    • These are the smaller BIQU marked motors.

    • Ensure that the cable connectors on the motors are all facing inwards under the base as shown.

  7. Mount the SSR Relay to the base. M4 x 12mm Button

    • Mount the SSR Relay to the base.

    • M4 x 12mm Button

    • M4 Nyloc

    • Mount the SSR with the load side terminals facing the rear of the base.

    • Bolt orientation is purely aesthetic, feel free to install the other way round (easier), with the nut on the top side of the base.

Author

with 1 other contributor

Makertech 3D

Member since: 3/9/18

51,265 Reputation

137 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 10

All Time: 686