You're viewing a previously published revision of this guide.  View latest revision

Older
Jun 04, 2020 - 08:06:41
Jun 16, 2020 - 05:06:43 Jun 16, 2020 - 05:06:36 Jun 05, 2020 - 10:06:00 Jun 05, 2020 - 10:06:36 Jun 05, 2020 - 10:06:34 Jun 05, 2020 - 10:06:52 Jun 05, 2020 - 06:06:45 Jun 05, 2020 - 06:06:17 Jun 05, 2020 - 06:06:04 Jun 05, 2020 - 06:06:34 Jun 05, 2020 - 06:06:11 Jun 05, 2020 - 06:06:58 Jun 04, 2020 - 08:06:10 Jun 04, 2020 - 08:06:15 Jun 04, 2020 - 08:06:46 Jun 04, 2020 - 08:06:29 Jun 04, 2020 - 08:06:41 Jun 04, 2020 - 08:06:48 Jun 04, 2020 - 07:06:57 Jun 04, 2020 - 07:06:36 Jun 04, 2020 - 07:06:08 Jun 04, 2020 - 07:06:16
Newer

Stage 02: Extruder

Written By: Makertech 3D
  • Comments: 0
  • Favorites: 0
  • Completions: 7

Difficulty

Easy

Steps

3

Time Required

00:20:00 - 00:30:00

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Extruder Spring

    • Extruder Spring

    • Drive Gear

    • Idler Arm

    • Back Plate

    • Coupling Mount

  2. Fix the back plate to the motor face. M3 x 6mm bolt

    • Fix the back plate to the motor face.

    • M3 x 6mm bolt

    • Match the orientation of the motors connector.

  3. Fix the coupling mount to the face of the motor. Coupling mount

    • Fix the coupling mount to the face of the motor.

    • Coupling mount

    • M3 x 16mm bolt

Author

Makertech 3D

Member since: 3/9/18

51,265 Reputation

137 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 471