You're viewing a previously published revision of this guide.  View latest revision

Older
Jun 06, 2020 - 07:06:42
Aug 10, 2020 - 09:08:00 Jun 16, 2020 - 05:06:54 Jun 16, 2020 - 05:06:49 Jun 13, 2020 - 06:06:28 Jun 13, 2020 - 06:06:24 Jun 13, 2020 - 06:06:40 Jun 13, 2020 - 06:06:06 Jun 13, 2020 - 06:06:35 Jun 13, 2020 - 06:06:28 Jun 13, 2020 - 06:06:19 Jun 13, 2020 - 06:06:25 Jun 13, 2020 - 06:06:15 Jun 13, 2020 - 06:06:23 Jun 13, 2020 - 06:06:17 Jun 13, 2020 - 06:06:53 Jun 13, 2020 - 06:06:53 Jun 13, 2020 - 06:06:17 Jun 13, 2020 - 06:06:13 Jun 13, 2020 - 06:06:28 Jun 13, 2020 - 06:06:35 Jun 13, 2020 - 06:06:51 Jun 13, 2020 - 06:06:32 Jun 13, 2020 - 06:06:38 Jun 06, 2020 - 07:06:01 Jun 06, 2020 - 07:06:48 Jun 06, 2020 - 07:06:42 Jun 06, 2020 - 06:06:41 Jun 06, 2020 - 06:06:29 Jun 06, 2020 - 06:06:01 Jun 06, 2020 - 06:06:06 Jun 06, 2020 - 06:06:30 Jun 06, 2020 - 06:06:34 Jun 06, 2020 - 05:06:42 Jun 06, 2020 - 05:06:40 Jun 06, 2020 - 05:06:30 Jun 05, 2020 - 10:06:58 Jun 05, 2020 - 10:06:01 Jun 05, 2020 - 09:06:18 Jun 05, 2020 - 06:06:37
Newer

Stage 03: Splitter

Written By: Makertech 3D
  • Comments: 7
  • Favorites: 0
  • Completions: 6

Difficulty

Easy

Steps

7

Time Required

00:15:00

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. The splitter kit should contain: Splitter back half

    • The splitter kit should contain:

    • Splitter back half

    • Splitter front half

    • Coupling (x4)

    • Coupling ring (x4)

    • Blue precision PTFE tubing - 20cm

    • Regular PTFE Tubing - 80cm

    • Splitter screws (x4)

  2. Assemble the four couplings by pushing the brass coupling ring onto the plastic coupling part. Assemble the four couplings by pushing the brass coupling ring onto the plastic coupling part. Assemble the four couplings by pushing the brass coupling ring onto the plastic coupling part.

    • Assemble the four couplings by pushing the brass coupling ring onto the plastic coupling part.

  3. Place three couplings in position onto the back half of the splitter. Fix the two halves of the splitter together with the four included screws.

    • Place three couplings in position onto the back half of the splitter.

    • Fix the two halves of the splitter together with the four included screws.

  4. Cut 8CM of the blue precision PTFE tubing. When cutting, use a craft knife and make sure that the cut is as flat as possible.

    • Cut 8CM of the blue precision PTFE tubing.

    • When cutting, use a craft knife and make sure that the cut is as flat as possible.

  5. Cut two 35CM lengths of the regular PTFE tubing. Again cut using a craft knife and make sure that the cut is as flat as possible.

    • Cut two 35CM lengths of the regular PTFE tubing.

    • Again cut using a craft knife and make sure that the cut is as flat as possible.

  6. Insert the 8CM PTFE tube into the hotend. It should be pushed all of the way down. Push the splitter onto the tubing like shown.

    • Insert the 8CM PTFE tube into the hotend.

    • It should be pushed all of the way down.

    • Push the splitter onto the tubing like shown.

  7. Fix the PTFE tubings into the couplings on the extruders. Fix the other sides into the splitter. Make sure that the the left extruder is feeding into the left side of the splitter and vice versa.

    • Fix the PTFE tubings into the couplings on the extruders.

    • Fix the other sides into the splitter.

    • Make sure that the the left extruder is feeding into the left side of the splitter and vice versa.

Author

Makertech 3D

Member since: 3/9/18

51,265 Reputation

137 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 735