You're viewing a previously published revision of this guide.  View latest revision

Older
May 08, 2018 - 06:05:55
Aug 07, 2020 - 09:08:46 Jul 14, 2020 - 12:07:36 Jul 14, 2020 - 12:07:32 Mar 30, 2019 - 03:03:47 Feb 14, 2019 - 08:02:30 Feb 14, 2019 - 08:02:21 Feb 14, 2019 - 08:02:56 Feb 14, 2019 - 08:02:47 Feb 14, 2019 - 08:02:47 Feb 14, 2019 - 08:02:38 Feb 14, 2019 - 08:02:19 Feb 14, 2019 - 08:02:13 Feb 14, 2019 - 08:02:46 Feb 14, 2019 - 08:02:13 Feb 14, 2019 - 08:02:51 Feb 14, 2019 - 08:02:47 Feb 14, 2019 - 08:02:38 Feb 14, 2019 - 08:02:21 Feb 14, 2019 - 08:02:17 Feb 14, 2019 - 08:02:27 Feb 14, 2019 - 08:02:59 Feb 14, 2019 - 08:02:07 Feb 14, 2019 - 08:02:40 Feb 14, 2019 - 08:02:03 Feb 14, 2019 - 08:02:43 Feb 14, 2019 - 07:02:15 Feb 14, 2019 - 07:02:13 Feb 14, 2019 - 07:02:30 Feb 14, 2019 - 07:02:22 Feb 14, 2019 - 07:02:18 Feb 14, 2019 - 07:02:52 Feb 14, 2019 - 07:02:06 Feb 14, 2019 - 07:02:52 Feb 14, 2019 - 07:02:36 Feb 14, 2019 - 07:02:16 Feb 14, 2019 - 07:02:07 Feb 14, 2019 - 07:02:27 Feb 14, 2019 - 07:02:18 Feb 14, 2019 - 07:02:10 Feb 14, 2019 - 07:02:32 Feb 14, 2019 - 07:02:25 Feb 14, 2019 - 07:02:21 Feb 14, 2019 - 07:02:15 Feb 14, 2019 - 07:02:47 Feb 13, 2019 - 09:02:04 Oct 31, 2018 - 05:10:15 Aug 14, 2018 - 04:08:37 May 18, 2018 - 11:05:32 May 09, 2018 - 08:05:26 May 08, 2018 - 10:05:15 May 08, 2018 - 10:05:42 May 08, 2018 - 09:05:51 May 08, 2018 - 09:05:29 May 08, 2018 - 08:05:30 May 08, 2018 - 08:05:49 May 08, 2018 - 07:05:27 May 08, 2018 - 07:05:05 May 08, 2018 - 07:05:11 May 08, 2018 - 07:05:21 May 08, 2018 - 07:05:27 May 08, 2018 - 07:05:14 May 08, 2018 - 07:05:55 May 08, 2018 - 07:05:44 May 08, 2018 - 07:05:01 May 08, 2018 - 07:05:09 May 08, 2018 - 06:05:55 May 08, 2018 - 06:05:48 May 08, 2018 - 06:05:01 May 08, 2018 - 06:05:35 May 08, 2018 - 06:05:23 May 08, 2018 - 06:05:23 May 07, 2018 - 09:05:01
Newer

Stage 6 - Gantry (Proforge 2)

Written By: Makertech 3D (and 2 other contributors)
  • Comments: 8
  • Favorites: 0
  • Completions: 22

Difficulty

Moderate

Steps

4

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Take the remaining 1.4M of GT2 Timing Belt and feed it into the Y-Carriage as shown in the secont image. Make sure the loop has no turns in it and the teeth are facing inwards though out. Fix an M4 x 12mm bolt with M4 nyloc nut as shown.

    • Take the remaining 1.4M of GT2 Timing Belt and feed it into the Y-Carriage as shown in the secont image.

    • Make sure the loop has no turns in it and the teeth are facing inwards though out.

    • Fix an M4 x 12mm bolt with M4 nyloc nut as shown.

    • Do not tighten all the way! Aim to match the photo.

  2. Assemble the Y-Idler: M5 Nyloc Nut

    • Assemble the Y-Idler:

    • M5 Nyloc Nut

    • M5 15mm Washer

    • M5 Washer

    • Bearing - 685ZZ

    • M5 Spacer

    • Y-Idler

    • M5 x 25mm Bolt

  3. Fix onto the remaing two 5mm holes two M5 x 8mm and M5 T-Nut assemblies.

    • Fix onto the remaing two 5mm holes two M5 x 8mm and M5 T-Nut assemblies.

    • Do not fasten all the way down.

  4. Slide onto the Shaft of the Y-Motor a Pulley. Do not tighten yet. Loop the GT2 belt from the Y-Carriage onto it. Make sure the Y-carriage wheels are facing towards you!

    • Slide onto the Shaft of the Y-Motor a Pulley. Do not tighten yet.

    • Loop the GT2 belt from the Y-Carriage onto it.

    • Make sure the Y-carriage wheels are facing towards you!

    • Make sure the loop is consistant and there are no twists.

Author

with 2 other contributors

Makertech 3D

Member since: 3/9/18

51,265 Reputation

137 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 6

All Time: 1,536