Stage 06: Wiring

Written By: Makertech 3D
  • Comments: 1
  • Favorites: 0

Difficulty

Easy

Steps

2

Time Required

00:45:00 - 01:00:00

Sections

1

Flags

0

  1. Place the printer front face down.

    • Place the printer front face down.

    • Follow the wiring guide here up to step 9.

    Edit

  2. Wire the print heads according to the diagram.

    • Wire the print heads according to the diagram.

    • The small Orbiter Power Boards will hang on the side of the printer instead of going into the base. Unfortunately making the USB cable from the print head longer here would have increased the risk of electrical noise.

    • Use the cable tie mounts and the cable ties to tidy up the cables.

    Edit
Finish Line

Author

Makertech 3D

Member since: 03/09/2018

50,845 Reputation

137 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 16

Past 30 Days: 60

All Time: 98