You're viewing a previously published revision of this guide.  View latest revision

Older
Sep 29, 2023 - 05:09:36
Dec 27, 2024 - 10:12:23 Jan 31, 2024 - 03:01:34 Dec 27, 2023 - 09:12:08 Dec 20, 2023 - 06:12:57 Oct 03, 2023 - 07:10:16 Oct 03, 2023 - 07:10:14 Oct 03, 2023 - 07:10:56 Oct 03, 2023 - 07:10:01 Oct 03, 2023 - 07:10:16 Oct 03, 2023 - 07:10:54 Oct 03, 2023 - 07:10:46 Oct 03, 2023 - 07:10:52 Oct 03, 2023 - 07:10:55 Oct 03, 2023 - 07:10:27 Oct 03, 2023 - 07:10:17 Oct 03, 2023 - 07:10:54 Oct 03, 2023 - 07:10:59 Oct 03, 2023 - 07:10:26 Oct 03, 2023 - 07:10:52 Oct 03, 2023 - 07:10:02 Oct 03, 2023 - 07:10:04 Oct 03, 2023 - 07:10:39 Oct 03, 2023 - 07:10:01 Sep 29, 2023 - 11:09:51 Sep 29, 2023 - 07:09:57 Sep 29, 2023 - 07:09:18 Sep 29, 2023 - 07:09:17 Sep 29, 2023 - 07:09:02 Sep 29, 2023 - 06:09:13 Sep 29, 2023 - 06:09:14 Sep 29, 2023 - 06:09:08 Sep 29, 2023 - 06:09:31 Sep 29, 2023 - 06:09:00 Sep 29, 2023 - 06:09:55 Sep 29, 2023 - 06:09:16 Sep 29, 2023 - 06:09:45 Sep 29, 2023 - 06:09:31 Sep 29, 2023 - 06:09:53 Sep 29, 2023 - 06:09:33 Sep 29, 2023 - 06:09:46 Sep 29, 2023 - 06:09:28 Sep 29, 2023 - 06:09:30 Sep 29, 2023 - 06:09:20 Sep 29, 2023 - 06:09:55 Sep 29, 2023 - 06:09:04 Sep 29, 2023 - 06:09:28 Sep 29, 2023 - 06:09:53 Sep 29, 2023 - 06:09:01 Sep 29, 2023 - 06:09:01 Sep 29, 2023 - 06:09:30 Sep 29, 2023 - 06:09:09 Sep 29, 2023 - 06:09:05 Sep 29, 2023 - 06:09:04 Sep 29, 2023 - 05:09:44 Sep 29, 2023 - 05:09:31 Sep 29, 2023 - 05:09:39 Sep 29, 2023 - 05:09:05 Sep 29, 2023 - 05:09:23 Sep 29, 2023 - 05:09:36 Sep 29, 2023 - 05:09:36 Sep 29, 2023 - 05:09:57 Sep 29, 2023 - 05:09:26 Sep 29, 2023 - 05:09:15 Sep 29, 2023 - 05:09:01 Sep 29, 2023 - 05:09:40 Sep 28, 2023 - 11:09:13 Sep 28, 2023 - 11:09:41
Newer

Upgrade: Enclosure

Written By: Makertech 3D (and one other contributor)
  • Comments: 11
  • Favorites: 0
  • Completions: 6

Difficulty

Easy

Steps

4

Time Required

00:30:00 - 00:45:00

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. Take the left panel and remove the protective film from it. Prepare the panel by loosely adding onto it fasteners. M4 x 8mm Bolt

    • Take the left panel and remove the protective film from it.

    • Prepare the panel by loosely adding onto it fasteners.

    • M4 x 8mm Bolt

    • M4 T-nut

    • Match the orientation as shown in the diagram about which side the bolts and nuts should be on.

  2. Install the panel to the left side of the frame by sliding it in from the front of the printer. Install the panel to the left side of the frame by sliding it in from the front of the printer.

    • Install the panel to the left side of the frame by sliding it in from the front of the printer.

  3. Take the right panel and remove the protective film from it. Prepare the panel by loosely adding onto it fasteners. M4 x 8mm Bolt

    • Take the right panel and remove the protective film from it.

    • Prepare the panel by loosely adding onto it fasteners.

    • M4 x 8mm Bolt

    • M4 T-nut

    • Match the orientation as shown in the diagram about which side the bolts and nuts should be on.

  4. Insert wisdom here.

    • Insert wisdom here.

Author

with 1 other contributor

Makertech 3D

Member since: 3/9/18

51,265 Reputation

137 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 7

All Time: 1,384