Proforge 3.5 Upgrade
View
Options
History
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
Introduction
Details
Guide Steps
Review
Quiz
Mount the X/Y Motors to the frame as shown.
Use M4 x 12mm bolts and M4 T-Nuts for this.
Facing the rear of the machine:
The left motor needs to be mounted approx. 33mm from the top extrusion as shown.
The right motor needs to be mounted approx. in line with the bottom of the top extrusion as shown.
The mount with the notch needs to be mounted onto the right side, the same side as the cable loom comes out of the base.
« Previous
Next »
Your contributions are licensed under the open source Creative Commons license.
Next line
Previous line
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.