V2 of the splitter is now shipping with all kits ordered after 1st October 2020.
The new design reduces the likelihood of jamming and provides a straighter path for the filament. We've also removed the need for the short ptfe tubes.
It is available to also 3d print, the STL files can be found here:
Axis Dual Splitter v2_Front
Axis Dual Splitter v2_Back
It uses the same hardware already included with the original splitter however you will also need three M3 x 10mm or longer bolts and three M3 nyloc nuts to secure the two halves of the splitter.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.