I got a new board because it was broken. I have the TCMs installed BUT I don´t have xuart, yuart, zuart… pins ?! What to do now?Getting a TCM Failiure!
Electric Fan is not working. It is plugged into the Board.=> Is it broken? => How to get a new one (warranty)?
(hot ended fan is working)
Hey MakerTech. When connectin in ponterface and i get the following error:
Connecting...
start
Printer is now online.
echo:Marlin 2.0.5.3
echo: Last Updated: 2020-03-31 | Author: (none, default config)
echo:Compiled: May 1 2021
echo: Free Memory: 3141 PlannerBufferBytes: 1232
echo:EEPROM version mismatch (EEPROM=? Marlin=V76)
echo:Hardcoded Default Settings Loaded
Testing X connection... Error: All LOW
Testing Y connection... Error: All LOW
Testing Z connection... Error: All LOW
Testing E connection... Error: All LOW
Testing E1 connection... Error: All LOW
echo:SD init fail
One guy commented the same issue here in the comments, but I don´t find the solution in the forums. Please provide me the solution. TY
ok. I found it. it is in the “dual extrution” guide.
Hey guys, I have the dual print upgrade. Here I see oly 1 of the two extruder connected to the board. Where to plug in the second one?
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.
I got a new board because it was broken. I have the TCMs installed BUT I don´t have xuart, yuart, zuart… pins ?! What to do now?Getting a TCM Failiure!
Electric Fan is not working. It is plugged into the Board.=> Is it broken? => How to get a new one (warranty)?
(hot ended fan is working)
Hey MakerTech. When connectin in ponterface and i get the following error:
Connecting...
start
Printer is now online.
echo:Marlin 2.0.5.3
echo: Last Updated: 2020-03-31 | Author: (none, default config)
echo:Compiled: May 1 2021
echo: Free Memory: 3141 PlannerBufferBytes: 1232
echo:EEPROM version mismatch (EEPROM=? Marlin=V76)
echo:Hardcoded Default Settings Loaded
Testing X connection... Error: All LOW
Testing Y connection... Error: All LOW
Testing Z connection... Error: All LOW
Testing E connection... Error: All LOW
Testing E1 connection... Error: All LOW
echo:SD init fail
One guy commented the same issue here in the comments, but I don´t find the solution in the forums. Please provide me the solution. TY
ok. I found it. it is in the “dual extrution” guide.
Hey guys, I have the dual print upgrade. Here I see oly 1 of the two extruder connected to the board. Where to plug in the second one?