I put the flex-plate sticker on after the platform was mounted. I did not want mod the flex-plate sticker with holes. I want it to look like my other printers with flex plates. I feel this should be part of the instructions to put it on last or after mounting the bed and no more screws are required for the bed.
I had no issues getting the power switch into the hole. No notch was needed. I will apply hot glue later if I find the power switch rotates with little effort to keep it in place. A notch would have been nice to have on the metal base to ensure no rotation of the power switch would happen.
I agree... nothing listed as M6x75 bolts in any hardware bag. Just the button heads listed as M6x75. I used them and figured if I need more hardware to replace what I used I'll just purchase them.
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
@brendandebeasi I found the M4 x 6mm to be perfect and the button head to lay below the magnet sticker.
I put the flex-plate sticker on after the platform was mounted. I did not want mod the flex-plate sticker with holes. I want it to look like my other printers with flex plates. I feel this should be part of the instructions to put it on last or after mounting the bed and no more screws are required for the bed.
This should say M5 x 8mm button head not bolt
I had no issues getting the power switch into the hole. No notch was needed. I will apply hot glue later if I find the power switch rotates with little effort to keep it in place. A notch would have been nice to have on the metal base to ensure no rotation of the power switch would happen.
I agree... nothing listed as M6x75 bolts in any hardware bag. Just the button heads listed as M6x75. I used them and figured if I need more hardware to replace what I used I'll just purchase them.