Introduction
The Dual Switching Hotend build manual for a non-Proforge printer will assume that you already have an understanding of open-source 3d printers and are comfortable editing the Marlin firmware for your own specific set-up.
-
-
When Unboxing check that you have the following:
-
Metal Parts
-
DSH Mechanics
-
DSH Electronics
-
NEMA 17 Motors and Cables
-
Other Parts Bag
-
Braided Sleeving
-
-
-
DSH Heatsink
-
DSH Backplate
-
DSH Probe and Fan Mount
-
-
-
Heatbreak (All Metal)
-
Heatbreak (PTFE Lined) x2
-
Heater Block x2
-
Brass Nozzles 0.4mm x2
-
PTFE Coupling PC4-M6 x2
-
Silicone Heater Block Covers x2
-
1.9mm PTFE Tubing 2M
-
Extruder Feeder x2
-
-
-
Thermistor
-
Heater Cartridges x2
-
Blower Fan
-
30mm Fan x2
-
TMC2208 Stepper Driver
-
NF-450 Thermistor
-
-
-
NEMA 17 Motor x2
-
Motor Cable x2
-
-
-
DSH Fan Shroud
-
Servo Arm
-
Probe
-
Servo Cable
-
Spacers
-
Servo
-
Needle Bearing (x2) and Washers (x1)
-
Fasteners and Cable Ties
-
-
-
NF-450 Thermistor
-
All Metal Heatbreak
-
-
-
Tool Carrraige
-
Rollers and Bearing Set (x4)
-
GT2 Belt
-
M5 Eccentric Spacer (x2)
-
M5 x 6mm Spacer (x2)
-
Fasteners: - M5 x 25mm Bolts (x5) - M5 Nyloc Nuts (x5) - M5 Washer (x5) - M4 x 10mm Bolt (x2) - M4 Nyloc Nuts (x2)
-
-
-
Allen Keys
-
Scissors
-
Needle Nose pliers
-
Slip Joint Pliers
-
A lighter (for braided sleeving - optional)
-
-
-
If you get stuck at any point or need help with assembly or printing something, feel free to post in the official forum.
-
If you're missing a part or have received a faulty/broken one, please use this form here to order a replacement.
-
Want to get in touch? Drop us an email at info@makertech3d.com
-