Modifying the config.txt file didn’t solve my problem but I found another solution by feeding the filament sensor number 2 (for the second extruder) with a piece of filament just to get a green light, so both of the sensors detect a filament and there is no message error about the filament detector.
Everytime I confirm to start the print, I have a message: “filament detection switch triggered” and the printer stop the printing (or sometimes start an auto-level process)
I tried to load and unload several time the filament at 200° and tried different*.stl file without success.
I have a smooth and continuous flow of plastic coming out of the Hotend nozzle at the Stage 10 Step 29 but nothing is printed when I try.
I correctly downloaded the Marlin firmware for Proforge 2S.
The X-axis works perfectly: the Home X button moves the hotend towards the endstops and stops when the endstops is touched; while the Home Y button makes move the hotend to the opposite of the endstops. I need to shut down the printer to avoid any crash when the hotend touch the beam.
Moreover, Home Z button works good (the gantry goes down) but doesn’t stop when the probe is trigerred… (The tests with Pronterface were all good with the X, Y, and Z Axis and the M119 command)
Thx guys, download work great. However, is it possible to get the final version of Cura Makertech Edition ? The download section is not working. I have been only able to download the beta version which doesn’t include Proforge 2/2S profile
Thx for your reply;
Modifying the config.txt file didn’t solve my problem but I found another solution by feeding the filament sensor number 2 (for the second extruder) with a piece of filament just to get a green light, so both of the sensors detect a filament and there is no message error about the filament detector.
Hi,
Everytime I confirm to start the print, I have a message: “filament detection switch triggered” and the printer stop the printing (or sometimes start an auto-level process)
I tried to load and unload several time the filament at 200° and tried different*.stl file without success.
I have a smooth and continuous flow of plastic coming out of the Hotend nozzle at the Stage 10 Step 29 but nothing is printed when I try.
Do you know what does this message mean ?
Ok, I don’t know why I had this issue with the Y-axis going in the wrong way but I found a solution by amending the source code of Marlin.
Configuration.h:
line 857 #define INVERT_Y_DIR true
change ‘true’ to ‘false’:
#define INVERT_Y_DIR false
I correctly downloaded the Marlin firmware for Proforge 2S.
The X-axis works perfectly: the Home X button moves the hotend towards the endstops and stops when the endstops is touched; while the Home Y button makes move the hotend to the opposite of the endstops. I need to shut down the printer to avoid any crash when the hotend touch the beam.
Moreover, Home Z button works good (the gantry goes down) but doesn’t stop when the probe is trigerred… (The tests with Pronterface were all good with the X, Y, and Z Axis and the M119 command)
I have an issue at this step.
When I press Y+ button, the hotend on my Proforge 2S move to the opposite of the endstop.
How is it possible ?
I double checked the wiring and everything is correct. It looks like my Y-axis motor rotate “upside down”.
How can I fix this ?
Thx guys, download work great. However, is it possible to get the final version of Cura Makertech Edition ? The download section is not working. I have been only able to download the beta version which doesn’t include Proforge 2/2S profile
The link is broken. How to download all necessary files ?