Do we need to add/remove anything?! or just check if it is there?!
What about the 2 wires coming from the other side, how they should goes? Could u hv a photo?
Got it cracked , please send me new good quality one , of course later I need the Stl file ( make sure it does fit the fan discharge)
No more M3 x 12mm ( extra 2 are needed) , why u did supply extra !
Actually got 4 , 2 with PTFE and 2 without . So which should I use?
Got 2+1 total 3, 2 of them does have PTFE tube inside .. shall I leave it inside or remove them?
Got only one blue and other one is white !
Leveling prob come with 2 nuts and washers, do we need to dismantle them ( no usage)?
My angled fan mount come with support material, I removed all support, I would recommend at later stage that u upload all Stl files for these 3 d printed parts
Where I can find the thrust bearing?
Page 1 of 2
Next
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
No reputation gained yet.
Do we need to add/remove anything?! or just check if it is there?!
What about the 2 wires coming from the other side, how they should goes? Could u hv a photo?
Got it cracked , please send me new good quality one , of course later I need the Stl file ( make sure it does fit the fan discharge)
No more M3 x 12mm ( extra 2 are needed) , why u did supply extra !
Actually got 4 , 2 with PTFE and 2 without . So which should I use?
Got 2+1 total 3, 2 of them does have PTFE tube inside .. shall I leave it inside or remove them?
Got only one blue and other one is white !
Leveling prob come with 2 nuts and washers, do we need to dismantle them ( no usage)?
My angled fan mount come with support material, I removed all support, I would recommend at later stage that u upload all Stl files for these 3 d printed parts
Where I can find the thrust bearing?
Page 1 of 2
Next