Difficulty
Moderate
Steps
2
Time Required
- Linear Rail Upgrade 2 steps
In Progress
This guide is currently being written. Reload periodically to see the latest changes.
Private
This guide will not appear in search results and can only be viewed by team members!
Quiz
0
-
-
Check that you have all of the following:
-
3D Printed Parts (x4)
-
Rails (x4)
-
Fastener pack
-
5x8 Coupling
-
M4 Threaded Inserts (x11)
-
You will also need (not included):
-
Allen keys, Drill with metal bits (2mm/3mm), Pliers, Soldering Iron (for threaded inserts)
-
-
-
Begin by disassembling the platform from the base.
-
Do this by first untying the belt from the platform.
-
Then remove the heated bed and place it to one side, you don't need to disconnect its wiring.
-
Finally, remove the old HDPE linear guides holding the platform in place.
-
