Stage 00: Unboxing

Written By: Makertech 3D
  • Comments: 13
  • Favorites: 1
  • Completions: 16

Difficulty

Very easy

Steps

11

Time Required

Suggest a time??

Sections

1

Flags

0

  1. The base model Axis 3D printer comes with: Box A - Electronics

    • The base model Axis 3D printer comes with:

    • Box A - Electronics

    • Box B - Mechanics

    • Power Supply, Cable and Adapter

    • Motor Cables (in Box A for some)

    • Base

    • Platform

    • Wrapping - Metal parts and lead screw

    Edit

    One of the power supply has stopped working correctly (I have tried inverting them and in effect one goes bad) can you tell me the power and the model or where to get the same?

    The hot bed was not starting correctly and I have had a hard time locating the error.

    Jim_Yang - Reply

    Please drop us a message directly at info@makertech3d.com

    Makertech 3D -

    There're people who can't difference colors, for this reason just use call outs for the user to identify the items instead of colors.

    Mathias - Reply

  2. Depending on which upgrades you have added: Power Pack Dual Extrusion

    • Depending on which upgrades you have added:

    • Power Pack

    • Dual Extrusion

    • OctoPrint

    • Heated Bed

    • Flexplate (Single or Double) with Magnet Set (x9 magnets)

    • TMC2208 Drivers (3 or 6pcs)

    Edit

    Hmmm… no magnets in my pack. I’ll send an email, I’m also missing soomething else.

    Torsten Unger - Reply

    replacements received

    Torsten Unger -

    What is that white ‘blob’ on the flexplate (third picture)? Is that something wrapped? There is nothing like that with my flexplate.

    Torsten Unger - Reply

    It’s the magnet set, just updated now to mention it.

    Makertech 3D -

    Hi there I have double checked my 3d printer items there is a missing part which is the LCD display is missing the nob

    Peter Law - Reply

    Please message us at info@makertech3d.com

    Makertech 3D -

  3. Cables: Probe, 15CM End-stop, 80CM End-stop, 30CM Power Port 40mm Fan - 20CM cable

    • Cables: Probe, 15CM End-stop, 80CM End-stop, 30CM Power Port

    • 40mm Fan - 20CM cable

    • Fasteners and fixings: Cable sleeving, cable ties, allen keys, PTFE tape, Stage 1,2,5,6a, 6b and 7 fastener packs.

    • A4988 Stepper Drivers (x5)

    • 40mm Fan - 1M cable

    • MKS Gen_L V2 Control Board, USB cable and 15 Jumpers.

    • Motor Cables

    Edit

  4. Hotend Kit NEMA 17 Motors (x4)

    • Hotend Kit

    • NEMA 17 Motors (x4)

    • Tool Carriage

    • Timing Belt Kit: GT2 Belt, 5x8 Coupling, Pulley (x2), 624ZZ Bearings (x5), Lead Screw Nut, Lead Screw End Cap and Allen Key.

    • Extruder Kit

    • Linear Guides

    • Lead Screw Bracket

    Edit

  5. Z-Pillar A

    • Z-Pillar A

    • Z-Pillar B

    • Gantry

    • Lead Screw - 265mm

    • Spool Holder

    Edit

  6. Filament (x2)

    • Filament (x2)

    • LCD Screen

    • SD Card

    • Brass Nozzles

    • Steel Nozzles

    • Silicone Hotend Sock

    Edit

  7. Flexplate - Single Flexplate - Double

    • Flexplate - Single

    • Flexplate - Double

    Edit

  8. Heated Bed

    • Heated Bed

    • Power Supply, Cable and Adpater

    • MOSFET

    • Fasteners

    • Power Port

    Edit

  9. TMC2208 Drivers (3pcs)

    • TMC2208 Drivers (3pcs)

    • TMC2208 Drivers (6pcs)

    Edit

  10. Splitter Kit

    • Splitter Kit

    • Spool Holder

    • Extruder Kit

    • A4988 Driver

    • NEMA 17 Motor

    Edit

  11. Pi Cam

    • Pi Cam

    • Ribbon Cable

    • Fasteners

    • USB Cable

    • Pi Cam Mount

    • SD Card (Class 10)

    • Wi-Fi Adapter

    • USB Power Converter

    Edit
Finish Line

16 other people completed this guide.

Author

Makertech 3D

Member since: 03/09/2018

49,447 Reputation

128 Guides authored

4 Comments

Agreed with statement above. All the parts listed are present. However I don’t see any of the screws/nuts to actually assemble anything together. I don’t think I would have made this purchase had I known I had to assemble “EVERYTHING”.

Kyle - Reply

Where’s the Raspberry Pi board supposed to be?

Sarah Gibson - Reply

Missing jumpers in my kit, I have looked 4 times. Has anybody found theirs? If so, where?

Shadowguide - Reply

all parts present. but this is aridiculous amount of work to assemble, i feel some assemblies could have been part assembled.

not sur ei would have purchased this had i known. may well sell it on uncompleted.

Perrie iles - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 1,121