Editing Step 33 —
Print Head Alignment Checks

Step Type:

Drag to rearrange

The pick up positions for each print head should be as follows:

Print head 0 - X:-70 Y:14

Print head 1 - X:-70 Y:108

Print head 2 - X:-70 Y:201

Print head 3 - X:-70 Y:296

Use mainsail to check that these positions line up on your build and that the tool carriage is able to pick up all of the print heads and place them back.

Move the tool head incrementally as you get close to these positions, checking that the cam is safely slotting into each tool plate.

If you find that these positions need adjusting, they can be done so in the variables.cfg file.

Your contributions are licensed under the open source Creative Commons license.