Editing Step 17 —
USB Serial ID

Step Type:

Drag to rearrange

Use Termius to SSH back into the printer in order to retrieve the boards serial id.

Ensure that the Octopus board is connected to the Pi via USB.

Find your unique id by sending:

ls /dev/serial/by-id/*

Copy the output to a notes or word file for now. We will need it later.

It should be written in the format shown. If you see the word MARLIN or FS_MODE in the id then the board has not flashed correctly - repeat the previous step. You can also plug the board directly into your pc to copy the firmware.bin file across, bypassing the SD card if it is causing issues.

Your contributions are licensed under the open source Creative Commons license.