Editing Step 39 —
Probe Offset

Step Type:

Drag to rearrange

Whilst the bed and first hotend are still hot we can set up the probe offset.

Home the printer and Select T0.

Move the print head to the centre of the bed.

With the print head now in the centre of the print area and with the hotend and bed hot send the command PROBE_CALIBRATE

Place a piece of paper between the nozzle and the platform. Use the wizard to raise/lower the nozzle. Stop once it grips the paper.

When happy hit accept. Send the SAVE_CONFIG command to save the offset.

Your contributions are licensed under the open source Creative Commons license.