Help
Thomas Letlow
@omgwizzle
Thomas Letlow
| 3 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 12/07/2023 | |
| 3 | Reputation |
|---|---|
| 0 | Guides |
| Member Since 12/07/2023 | |
@makertech3d There are community made Orca and Prusaslicer profiles that work with the 4 toolheads, it is possible.
I would also recommend this app, its very easy to use compared to other I could find.
https://belt.connect.prusa3d.com/
@makertech3d The BOM says we only need 28 M5 Nyloc Nuts and 28 M5 x 10mm Bolts for the roof panels and 2 M5 Nuts for the roof stopper totaling 28 bolts and 30 nuts. There is extra given so we have 35 of M5 x 10mm Bolts and M5 Nuts.
If you count how many you actually need, its 36 for the roof panels and 2 for the roof stopper. We're all missing 1 M5 x 10mm Button Bolt and 3 Nyloc Nuts.
In the meantime, since most people don't have those on hand, you can use the M5 T Nuts and M5 x 8mm Bolts from the Proforge 4 Fastener bag as replacements.
Does anyone know how to get this panel on with the camera attached? The camera sticks out too much for me. @makertech3d
Dont forget to add the heatsink to the motors
The magnets break VERY VERY easily, do NOT overtighten